Switch Power Supply

Switch Power Supply
Details:
product name:12V 30A Switching Power Supply 360W ac to dc 110v/220v with CE ROHS approved power supply
Send Inquiry
Description
Send Inquiry

Features

 

1.High Efficiency and good price

2.Built-in EMI filter

3.100% full load burn-in test

4.Low output ripple and noise
5.Protection:Over load/Over voltage/Short circuit

3 -

 

Parameter

 

Model Specification SUN-350-5 SUN-350-7.5 SUN-350-12 SUN-350-15 SUN-350-24 SUN-350-27 SUN-350-48
DC output voltage 5V 7.5V 12V 15V 24V 27V 48V
Output voltage error ±2% ±2% ±1% ±1% ±1% ±1% ±1%
Rated output current 50A 40A 29A 23.2A 14.6A 13A 7.3A
Output current range 0-50A 0-40A 0-29A 0-23.2A 0-14.6A 0-13A 0-7.3A
Wave and noise 50mVp-p 150mVp-p 150mV 150mV 150mV 200mV 240mV
Inlet stability ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load stability ±1% ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
DC output power 250W 300W 348W 348W 350.4W 351W 350.4W
Efficiency 78% 79% 83% 83% 84% 85% 86%
Adjustable range for DC voltage 4.5-5.6V 6-9V 10-13.2V 13.5-18V 20-26.4V 26-32V 41-56V
AC input voltage range 90~132VAC/180~264VAC BY SWITCH 47~63Hz;248~370VDC
Input current 6.5A/115V 4A/230V
AC impulse current 25A/115V 50A/230V
Leakage current <3.5mA/240VAC
Overload protection 105%~135%. Type,PULSING HICCUP SHUTDOWN; Reset,auto recovery
Over-voltage protection 5.75-6.75V 9.4-10.9V 13.8-16.2V 18-21V 27.6-32V 33.7-39V 57.6-67.2V
High-temperature protection RTH3>=65°C FAN ON<=55°C FAN OFF>=80°CCut off output(5~15V)
RTH3>=70°C FAN ON<=60°C FAN OFF>=85°CCut off output(24~48V)
Temperature coefficient ±0.03%°C(0~50°C)
Setup rise hold up time 200ms,50ms,20ms
Vibration 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES
Withstand voltage Input and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC
Isolation resistance Input and output interval,Input and enclosure,Output and enclosure,500VAC/100M Ohms
Working temperature and humidity -10°C~+50°C,20~90%RH
Store temperature and humidity -20°C~+85°C,10~95%RH
Overall dimension 215*115*50mm
Weight 0.95Kgs /17pcs per carton
Safety standards Design refer to UL1012, EN60950-1,EN61347-1,EN-61347-2 approved
EMC standards EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved
Note:1.The testing condition for the parameter above is,230VAC input, rated load,25°C 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note,5)
3.Wave test,adopting"A12"double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test, when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2,3,11must be knocked down.

 

Hot Tags: switch power supply, China switch power supply manufacturers, suppliers, factory, 6KW Communication Power Supply, monitor power supply, power supply unit, rack power supply, Solar System for BTS Telecom Base Station, telecom power supply

Send Inquiry